Powered Remote Speakers

Perfect for RV Parks and Campgrounds

JAN Communication’s Addressable Amplified Speakers are suitable for any permanent or temporary public address paging application. Our model is designed specifically for RF-controlled paging and incorporates both VHF (covering 154-174 MHz range) and UHF (covering 450-470 MHz range) radios to provide wireless, one- way paging. The speakers can be added to any existing radio system with minimal effort or cost. Additionally, it is PC-programmable and can be configured for individual, group or all-page access via DTMF or Two-Tone coding.*

The Addressable Amplified Speaker is weather resistant and can be used for any environmental application. The unit provides wireless one-way paging from four feet to many miles away. Speakers can be added to any existing radio system with minimal effort or cost. The need for routing signal cable is eliminated as 12VDC or battery/solar power is all that is necessary. The volume of each speaker can be programmed by software applications or controlled remotely via DTMF code. There are also termination provisions for a remote, hard-wired L-pad volume control, mounted on the speaker or in a Remote Knock Box.

Features

• Built in 8-Watt Amplifier for Public
  • Address Applications.
• Radio Control (UHF/VHF)
• Addressable (individual, zoned, all-page) via DTMF or 2-Tone.
• Remote DTMF Volume Control
• 12VDC Input Power
• Surface or Pole Mounting
• Power Saver Feature
• PC Programmable
• External Long-life Battery Option
• Solar Panel Power and Battery
  • Backup Options

Typical Applications

• Police and Fire Stations**
• Amusement and Public Parks
• Warehouse/Factory (indoor-Outdoor) -
• Construction Sites
• Entry Gates
• Camps/Camping
• Schools and Offices
• Security and Public Safety
• Golf Courses, Ski Resorts
• Sporting Events, Parades, Parks
• Amusement Parks, Carnivals
• Public Address (temporary)

*Perfect for the Fire Company **
Sets off your fire pager!

Parts and Accessories

JAN0113362
Designed for RF-controlled paging. VHF model (154-174 MHz rage). Includes integral RF receiver module and antenna. PC programmable with addressable DTMF or Two-Tone operation.*

JAN0113372
Designed for RF-controlled paging. UHF model (450-470 MHz range). Includes integral RF receiver module and antenna. PC programmable with addressable DTMF or Two-Tone operation.*

JAN0113308
12VDC Power Supply– Provides a 1A output and can operate one speaker. Can be used outside if installed in weatherproof enclosure. Installer must connect 85-265 VAC to the supply and route 12VDC from supply to a terminal strip inside the speaker enclosure (spare/replacement)

JAN01231
Pole Mounting Kit– required for pole-mounting the JAN0113362 or JAN0113372 Amplified Speakers.

JAN01230
Pole Mounting Kit– required for pole-mounting the XB001 Long-life
Battery Enclosure Kit.

JAN01BB133
Battery Back-up Kit– includes a mounting bracket, 2.8Ah battery, and mounting screw. Fully charged battery provides 2 hours of back-up at full output. Provides over 500 cycles on a full charge and can also be used for short-term, battery-only operation.

JAN01XB001
External Long-Life Battery Kit– consists of weatherproof enclosure designed to house the JAN0140201 18Ah battery (ordered separately). also houses the solar charge regulator module found in the JAN01SPK200 Solar Panel Interface Kit.

JAN01SPK200
Solar Panel Interface Kit– includes a charge regulator module, pole mounting kit, and necessary mounting hardware for assembling the JAN01RFP7784 Solar panel (ordered separately) to a pole or flat surface. (Customer to supply U-bolts or metal banding for connecting bracket to pole).

JAN01RFP7784
Solar Panel– provides 30W of output power. Panel includes 15-foot connecting cable for termination inside the JAN01XB001 Battery Kit.

JAN0119101
RF Module Programming Kit– is required for programming the radio
frequency and PL code (tone or digital) into the radio module. Includes cable and software to change all parameters in speakers.

JAN0140201
18Ah Long-Life Battery- provides a minimum of 18 hours of operation at full output and provides over 3,500 cycles at max output.

JAN01UHF or JAN01VHF
Portable Keypad Radio– complete with antenna, rapid charger, belt clip, and battery. Programmed to speaker (specify VHF or UHF at time of purchase). Keypad has ability to raise and lower volume on speaker remotely.

JAN02UHF or JAN02VHF
Portable Radio without keypad to encode speaker only. Includes rapid charger, belt clip, antenna, and battery. Specify UHF or VHF at time of sale.

* Specify L-pad volume control or speaker on 10-foot long single-gang plate (customer to supply Knock Box). Includes transformer (JAN0140404).